![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgTTc_PJQx9vfdV8-Pi3h6eMrSAawqFT-7Jzd8tOAW-epBlciQqxJXyGNILBcB5SWvX8rqpGtV9I6AeTGgsN9-NbAra9u3rvvIHXdj5akSAue-T4jhxSeVkErkDXjwKQ4yDqrWP4PbF/s320/2011-12-18+15.24.23.jpg)
I made these gift tags for Christmas gifts. I am using them by themselves without bows, I think the wired ribbon dresses them up enough...
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhzyO9V_4wQz5ez5dZyWN5j-mAoKdKSp2Nzp0y-rXcRGY-TLewNOEAaTZmouCKirTZeNBxIHnbYxvuR-Aieb4FiBHda2LAk96NVXBf9NKzMEE9v_hAEnwnyAQXyOsL56lEJxnZlgZVJ/s320/2011-12-18+15.23.58.jpg)
1. I cut 2 x 4 inch tags from Christmas printed cardstock.
2. I made / printed labels on the computer, cut them to the size and stuck them to the tags.
3. I used a corner punch to fancy up the corners of the tags.
4. I used a hole punch to make a hole in the tag.
5. I cut thin, wired ribbon approximately 6 inches in length, attached it to the tag (like a hang tag) and curled the ribbon around a crayon.
And there you have it...
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjDJWefUyFV1-ImB4lX98ggerwME4SP5fQWnttutvzyELCCO1Nq5omfBS4eVV8ITCPrLSSYkiFGpSysrOcbA_Pa7XX4AIWvEALWISnbovgSbOug-vE2h7sHJ-JGF4IgXnpJDNbBZwjQ/s320/2011-12-18+15.26.38.jpg)
No comments:
Post a Comment