Jocelyn Rae's Personalized Baby Quilt

Yep!  Another one!  They're having babies like crazy lately!  lol.  Loving this fabric too.  I don't have the names but love, love, love!  

Brooklyn Frances' Personalized Baby Quilt

I'm rollin' with the baby quilts!  I'm in love with this fabric, they are brand new coordinating patterns Nursery Fabric Lovely Love Dots, Hearts and Animals.  I'm a bit late getting this made but it's been a busy fall!  

Logan Joseph's Personalized Baby Quilt

 Here's another one that I made to go with the Monster's Inc theme:

Baby Hair Bows a Bloomin'

My friend made me lots of hair bows for my little project.  I saw a pin that, of course, I cannot find to give credit for my inspiration.  Maybe it's because I have like 7000 pins across 80 boards plus at least half as many likes.  I know I have a problem.

These were made to coordinate with Cathryn's Baby Quilt and her matching Personalized Baby Nursery Bunting to be put on display at the baby shower.

I used the hair bows as flowers and attached them to skewers that were wrapped in ribbon and stuck into styrofoam discs placed in little buckets.  I used curling ribbon bows as grass to hide the styrofoam discs.  I love the way they turned out!

Personalized Baby Nursery Bunting

This was a first for me.  Sorry, no tutorial but I just wanted to show off my bunting that I made to go with Cathryn Brooke's baby quilt that I posted yesterday.  I embroidered the flags with letters to spell the special little one's name.  We displayed it above the cake table at the shower.

Cathryn Brooke's Personalized Baby Quilt

I don't think I'll ever be back into the full swing of blogging but I do have to say that I miss it terribly.  There are just not enough hours in the day.  I do have lots of projects planned so I will have to post on those once finished.  But in the meantime there's been a few babies born / on the way!

I made a Baby Quilt for my friend and neighbor's Grandbaby to arrive in January!  I embroidered it with the little one's name.  

And wait until you see what I made to coordinate with it!  

Captain and his First Mate Fabric Applique T-shirt and Onesie

Now I have made these type of appliques onesies before but I didn't sew around the edges of the fabric.  I was very leery of it, like how will I be able to sew the edges of these tiny shirts by ulled the back of the shirt away.  I just envisioned a struggle.  Well, Kathy (new baby mommy) had her second baby boy and I really wanted to make these shirts to go with her nautical boy's room theme and the onesies that I made before turned out great and all but they really needed the finishing touch of the sewing around the edges.  It will also help keep the applique attached in the wash as I am also skeptical of the fusible web product holding up in the wash.  I have noticed that some survive the wash perfectly fine yet some do not.  It may have something to do with getting good adhesion when applying the applique from the start.  Maybe what you think is ironed on well, may not be the best.  Is there a way of knowing?  Anyhow, I am very pleased with the way these turned out.  YES, I did come up with this on my own for the big brother and new little brother.  I cannot wait until she sends me pictures of the boys in these, I will certainly update this post with updated pics!

How I Did It:

1.  I sketched half an anchor on a folded piece of paper.  I'm not too confident that I could actually draw an anchor where both sides matched.  This is the best way that I could come up with.  

2.  I cut out the anchor.  I did make them different sizes for the different size shirts.

3.  I used my Generations embroidery software to design labels for my anchors.  I used a simple arial font.  I stitched them both out on my embroidery sewing machine.
+

4.  I pressed them both.

5.  I used Steam A Seam to adhere the fabric appliques to the shirts.  You should take a look at a better tutorial HERE.  It has more pictures and more detail for each step in the process.  Just remember that I did not sew the edges of those onesies!
 
     a.  I traced the anchors onto Steam A Seam fusible webbing sheets.  I traced them on the side where the webbing is adhered to.  (Note:  the webbing is in the middle of two sheets of wax type paper and the webbing is adhered to one side rather than the other.)  The side that the webbing sticks to is the side that you want to draw on and if your pattern is not symmetrical it will need to be reversed, make sure you do so here.

     b.  I placed the fabric right side down.

     c.  I peeled the opposite side of the Steam A Seam sheet paper (without the anchor design) away and placed the design over top of the fabric, centering the anchor over my embroidery.

     d.  I ironed the Steam A Seam to the back of the fabric.  This is ensure that the design and/or fabric will not shift while it is cut out.

 
     e.  I cut the anchor out along the lines of the design.

     f.  I flipped the anchor over, peel the other sheet off of the webbing and ironed the anchor to the shirt.

6.  I used the applique stitch and stitched around the anchors on each shirt.  The hole at the top was quite tricky.  I cannot be begin to tell you what the correct way of doing it would have been.  I will just leave it at that.  =)

Now, I know that this tutorial really leaves something to be desired but I was winging it.  I have other projects planned I will surely post a better tutorial soon.

Big Brother Bag

This was a gift I made for Reid's big brother, Avery.  I kept with the nautical theme, I bought a canvas bag and decided to make a stencil using my Silhouette and paint a design especially for the new big brother.

How I Did It:

1.  I bought an anchor design on the Silhouette online store and designed a stencil using Silhouette Studio.

2.  I cut out my design using my Silhouette on vinyl.

3.  I placed the design on the bag and positioned it where I wanted it.  I did not use transfer paper for this process as there were no small intricate cuts that transfer paper is very useful for.

4.  I used a sponge brush to dab fabric paint over my stencil.

5.  I carefully peeled away the vinyl and used a hook instrument to remove the smaller pieces.  I did this while it was still wet but you could wait until it is dry as well.

Baby Reid's Personalized Quilt

My friend, Kathy, had another baby boy, Reid.  I had the pleasure of meeting him yesterday when she brought him for a visit at work.  He's a little cutie pie.  She is updating her nursery with a nautical themed room for her two boys to share.  Check out her blog and my inspiration here.  And her latest boy's room update here.  I can't wait to see the finished room, hopefully will not have to wait too much longer...

Kathy did send me pictures of the fabric that she had picked out for the boy's room:

I had a heck of a time finding nautical fabric without pirates!  I ordered the fabric online at spoonflower.com:

I chose:

Anchor Navy by kimsa

skinny mitten stripes - icy blue by weaving major

sailing pattern by mintparcel

I ordered a fat quarter of each so I didn't have room for any mess ups!  (The heat was on...)  I embroidered the new guy's new and birth day and put the quilt together.  Check out a tutorial HERE.

And the finished product:

Other personalized baby quilts:
Avery's Personalized Baby Quilt
Gage's Personalized Baby Quilt
Robert Jame's Personalized Baby Quilt
Maria May's Personalized Baby Quilt
Greyson Paul's Personalized Baby Quilt